Fujikura Speeder Evolution III Shaft
The Fujikura Speeder Evolution III is the “Goldilocks” of the Evolution shaft series. We previously reviewed the high-launch Evolution and the low-launching Evolution II, but the Evo III is the mid-launch and spin member of the family. Typically I’ve been locked into the Evolution II as my review will tell you, but the Evolution III has given me a nice option to bring my launch and spin up just a bit more to get a little extra carry.
First Impressions
I’ve always enjoyed how Fujikura has toed the line with traditional looks and the modern flashy hockey stick vibe. The Fujikura Speeder Evolution III has a really sleek fiery look with hits of red, yellow, and orange. The graphics are on brand with the previous releases of Speeder Evolution shafts and fit well with the color scheme. I wouldn’t say the Evolution III screams for attention, but it’s noticeable when you spot one in the wild. Compared to the Evolution II, the red look is a little more subtle.
How Does it Feel?
A large reason the Fujikura Evolution III is a nice alternative for me is because it feels pretty similar to the Evolution II. There’s obviously going to be some difference considering it’s a higher launching shaft. The end result is more a smoother flex profile with a little less pronouncement of the kick the II has. I’ve found that I tend to make a smoother swing with the Evolution III which likely plays a large role in the smoother feeling profile. Overall, the Speeder Evolution III has the same “liveliness” that I love in the Evo II. It gives me a lot of confidence to rip into the ball and leave nothing behind.
On-Course Performance
| Club Speed | Ball Speed | Launch Angle | Spin | Carry (Yds) | Total (Yds) |
|---|---|---|---|---|---|
| 112 | 162.6 | 12.1º | 1941 | 294 | 321 |
My experience with the Fujikura Speeder Evolution III is a true testament to being properly fitted. As stated previously, the Evolution II is a staple for me and consistently ends up being the best fit. While testing/fitting, I noticed I was getting some great speed and consistency with a specific driver head, but wasn’t getting the best distance numbers. After a few tweaks of the head not really working out, we decided we needed a shaft change. Upping the spin and launch without sacrificing what I love in my Evo II would be ideal. I swapped in the Evolution III which improved my numbers and it was the perfect fit for that club/swing combination.
I found the Speeder Evolution III to be easy to control and diverse for shot selection. A solid mid-launch/spin shaft is nice because it doesn’t take a big fight to get a little more height or knock it down.
Final Thoughts
With the addition of the Speeder Evolution III, Fujikura really rounded out a great shaft lineup. That third option gave the Evolution lineup room to reach more golfers looking for that Speeder magic. If you’re looking for a mid-spin, mid-launch shaft with excellent feel, put the Fujikura Speeder Evolution III on your radar.
I will be in Palm Springs in March for a week. I am hoping to find a shop where I can have a Speeder shaft 565 or 569 put in my Driver. Can you recommend a shop where I can have this done.
I would suggest Club Champion. They don’t have a location in Palm Springs (yet), but they have locations in Los Angeles and San Diego.
I have the 569 Regular in a 12 degree PXG 0341X head set at 13.5 degrees – the shaft is very stable and outperformed others we tested. Example data
Club Speed Ball Speed Launch Angle Spin Carry (Yds) Total (Yds)
84.1 127.5 15.7 2138 192 225
What flex these results based from… I’m currently gaming an evo 2 Fujikura 661 ts x flex 6.2… I would like a tad more height on it. Is the TX version of evo 3 of this more like my current gamer but with more height and spin?.
I have no idea. Apples to oranges and I didn’t hit an TX. Specs can be seen in the pictures, but not really relevant for the comparison you’re looking for and how your swing would interact with the two shafts.