Project X EvenFlow Black Hand Crafted Shaft
The Project X EvenFlow Black Hand Crafted shaft is Project X’s answer to players who want the stability, low launch, and low spin of the Project X Hzrdus Black, but with more feel. Its “even bend profile” is designed to create “maximum energy release at impact,” resulting in faster ball speeds and more distance. Sound like something you’re looking for? Then read on!
The Looks
The Project X EvenFlow Black Hand Crafted is meant to be a compliment to the HZRDUS Black shaft, with a smoother feel. Similar to every model in the EvenFlow lineup, the EvenFlow Black features a sweet white logo, with a light “wave-like” pattern design all of the way down the shaft. The design may appear plain at first glance, however, the design really pops in the right lighting. It has almost a “stealthy” look to it, and makes for an awesome looking shaft.
The Handcrafted version of the EvenFlow, like all other Hand Crafted Project X shafts, will feature the “Hand Crafted” stamp just above the top of the logo. To find out the difference between the regular version and the Hand Crafted version, click here.
How Does it Feel?
As I mentioned earlier, the Project X EvenFlow Black shaft is a counterpart to the HZRDUS Black shaft. While both shafts are low launching, low spinning shafts, the HZRDUS is what some call “boardy.” The EvenFlow is anything but that. While the EvenFlow Black definitely is a stout shaft (and you can feel it), it’s able to maintain a very smooth feel to it. I never had any issues knowing exactly where my club head was during my swing, and the shaft always managed to feel smooth, yet extremely stable. With such a stiff shaft, sometimes you might feel the need to go after one. Even with my wildest swings, the EvenFlow Black still felt smooth and under control.
On-Course Performance
| Club Speed | Ball Speed | Launch Angle | Spin | Carry (Yds) | Total (Yds) |
|---|---|---|---|---|---|
| 114.6 | 171.4 | 12.8º | 2583 | 294.8 | 300.7 |
From my first range session with the Project X EvenFlow Black Hand Crafted shaft, I knew this shaft was a beast. I’m typically a very high ball hitter. Like, “hit my drive, run down the fairway, and catch it before it lands” high. When I paired with this shaft with the right head, my launch angle went down significantly. I went from hitting the ball to the moon, to a more penetrating ball flight. Additionally, I spin the ball a ton. I’ve been known to even spin the ball backward in a firm-ish fairway. This shaft not only gave me lower launch, but much better spin rates. Again, normally my drives are all carry. With the EvenFlow Black, I was actually seeing some roll. The results? A much more consistent, penetrating ball flight with some added distance from the roll.
With the proper flex EvenFlow Black in my driver, my dispersion on drives improved. The biggest improvement? My misses to the right were MUCH less severe. Overall, my drives seemed to be more in control. I gained distance through a better launch angle and better spin numbers, resulting in hitting more fairways. What more could you ask for?
Final Thoughts
If you need to reduce launch and spin, and are looking to add more distance, I highly recommend checking out the Project X EvenFlow Black shaft. The EvenFlow Black maintains control and stability for even the fastest swings, while still allowing you to feel the head throughout your swing. I noticed a much more consistent, lower ball flight, which equated to more distance. The stability of the shaft, while still maintaining great feel, is something you don’t always see in a low launch, low spin shaft. Just remember, the most important thing is matching up the right shaft for your game with the right club head. When making a shaft change in your bag, visit a qualified club fitter.
Hey Tommy, I am in the same boat as you, I have the same swing speed and am suffering of a really high launch.. I play the AD DI 6X and a 0,75″ tipped 45″ Hzrdus Yellow 6.0 and I have to play a really low loft to keep the ball on the correct trajectory, like 7,5° low.. I would prefer to play like a 9° head to keep some forgiveness..
I have tried the Hzrdus Black, but it feels too boardy, never liked the feel of a 6.5 on a Hzrdus Yellow also. Seems like this shaft in 6.0 tipped maybe 0,5″ would be perfect for me, what stiffness where you playing this shaft on, it’s not in the article and not in the pictures, thank you!
My apologies! The shaft for this review was the 65g 6.5 (X-Flex). Standard tipping from Callaway. I found it had plenty of “feel,” even compared to a 6.0 HZRDUS, but that’s always going to be a personal preference. Lots of love for this shaft in the golf community though! One of the best shafts PX has put out in my opinion. Good luck and thanks for reading!
Tommy – any other source that discuses the difference from the HC version and the non HC version? From a fellow Chicagoan.
Hey Adam,
Thanks for stopping by!
Do a quick google search of “project x handcrafted vs non handcrafted” and you’ll find a ton of forum posts, etc. where people discuss the differences. Hope this helps!
Thanks for reading!
Tommy
In short, the real difference is that they’re both still technically “hand rolled” but one is done in the US and one is done in their overseas operation in bulk production. The difference is that the Hand Crafted shafts have tighter tolerances from shaft to shaft and get closer inspections.
In more recent shafts, they’ve done away with the whole Hand Crafted moniker at retail.
Because they moved to Small Batch. Same concept.
The even flow blue hand crafted where are they made.
Where are the even flow blue hand crafted made
I believe in San Diego
I just bought the even flow black,and I noticed about 10 inches at the bottom the swirl on the shaft sticks out a little it not smooth at the bottom,is this a slight defect in the shaft, help
Bob –
You’d have to contact Project X to ask.
Thanks,
Tommy